How to extend the service life of screw machine equipment?

Any machine equipment have a service life, some have a long service life, some have a short service life, screw machine also have a service life. Only the correct use maintenance can ensure the normal operation of the screw machine keep in good condition. How to extend the service life of screw machine as much as possible? You need to know the following details:

1. Pay more attention to the cleaning of the machine keep the equipment clean to avoid unnecessary accidental damage to the machine;

2. First of all, when adding screws, we need to check whether there are any defects, such as mixed materials, flower heads so on. In the screw, make sure there are no other screws shaped screws (including flat head, burr, etc.). Unified specifications, so as to damage the screw feeder;

3, the pressure should be adjusted too high, too high pressure, easy to cause the impact of screw impact electric intermittent nozzle, screw nozzle wear;

4. Screw torque setting shall be suitable for product locking payment. Don't blindly pursue large torque. Do lift the motor lot until the screw locking payment can be determined the most appropriate torque value is achieved.

5. Before using the equipment, test whether the sliding of the electric batching nozzle on the sliding sleeve is smooth, the phenomenon of sticking is allowed, so as to affect the normal locking releasing of the screw after the screw enters the electric batching nozzle;