Introduction of automatic screw machine

Working environment of automatic screw machine

The operating voltage of the automatic screw machine is usually configured by the customer. The air compressor has 220 volts 380 volts. To put it simply, the power voltage of the automatic screw machine is 220 volts, including hand-held screw machine, multi-shaft automatic screw machine automatic screw machine. The operating voltage of the internal components of the hand-held screw machine is to convert the 220V power supply voltage to 36V.

The working voltage of the internal components of the automatic screw machine is to convert the 220V power supply voltage to 24V.

Automatic screwdriver operating temperature

Automatic screw machine belongs to automatic equipment, special equipment. Its operating temperature is similar to other machines, generally between -20℃ 40℃. Low temperatures can affect the normal operation of some components.

Notes for use of screw machine

1. The sliding of the electric batching nozzle on the electric batching nozzle should be kept stable, otherwise the screw will easily enter the electric batching nozzle affect the use of the machine.

2. Do bend the screw conveying pipe, otherwise the screw will get stuck in the elbow during the screw conveying.

3. Be sure to wait until the torque of the batch reaches the set torque, lift the batch after the batch stops automatically, otherwise the machine will work, send a screw to the nozzle of the batch to be locked.

4. If it is found that the machine does send screws to the electric batching nozzle to be locked, the locking screw can be played again, the button of the screw can be manually sent once, so that the machine sends screws to the electric batching nozzle to be locked.

5. The pressure should be adjusted too high, otherwise it will only accelerate the wear speed of the electric batch nose nozzle.

6. The vibration force of the track should be adjusted too much, otherwise the screw will easily squeeze the track on the screw track, affecting the stability of the machine.