I. Description of configurable parameters
(1) Torque, Angle speed can be set freely;
(2) The system can freely set the torque range Angle range of a single screw;
(3) The tightening process of a single screw can be controlled by stages, can realize free switching between positive negative rotation, slow tightening, twisting maintaining pressure, etc.;
(4) Each screw can set different torques rotating speeds according to the process requirements, various torques can be output during the tightening process of the same product;
(5) The system can effectively edit store 6 sets of commonly used tightening processes, which is convenient for quick product switching corresponding;
(6) The system is provided with operator login administrator operation management authority, which can effectively guarantee monitor data system security;
Ii. Tightening state control
(1) When the torque reaches the corner too short, the screw is too short, the torque is too small, screw floating lock other bad conditions can be effectively detected.
(2) When the torque reaches the corner for too long, it can effectively detect the bad conditions such as excessively long screws, excessive torque, screw sliding teeth, etc.
Iii. Visualization of tightening data
(1) The system displays the torque Angle value of the current screw in real time.
(2) The system can effectively display warn whether the torque Angle value of the current screw tightening are within the established range;
(3) The system can effectively display store the torque value Angle value of each screw of the current product;
(4) The system can effectively store the data value screwed up on the same day, with a storage capacity of about 100,000 groups;
(5) OK&NG display the tightening state, prompt it through the screen alarm;
4. Tighten data traceability
(1) The system can effectively trace the tightening state data of each product through the two-dimensional code of the product;
(2) The system can retrieve the corresponding product the corresponding screw position through quality anomaly;
(3) The system can trace the tightening quality data through the operator, operation time product code;
(4) System data can be automatically generated Excel file, directly printed downloaded;
Available for :(plane machine + landing machine + robot + online machine, etc.)
Flat machine | Fall to the ground | The robot |
model | Tie-in drive | Rated power (W) | Rated torque (M.n) | Instantaneous maximum torque (M.n) | Rated/Maximum speed (M.n) |
TS4603N | TA8480N0000 | 100 | 0.318 | 0.95 | 3000/5000 |
TS4607N | TA8480N0100 | 200 | 0.64 | 1.91 | 3000/5000 |
TS4609N | TA8480N0200 | 400 | 1.27 | 3.85 | 3000/5000 |
TS4614N | TA8480N0300 | 750 | 2.39 | 7.16 | 3000/5000 |
Tel:18025151318
Mai:service@jcuan.com
网址:www.jcuan.com
Company address: 3rd Floor, Building A, Kangpeng
Science park, No. 83, Yuanying Road, Zhuyuan Village,
Liaobu Town, Dongguan City
All rights reserved:Juchuan Assembly Automation Technology Co