I. Functional Features:
1 suitable for m1.0-M4 screws;
Precision screw drive, strong rigidity, high positioning accuracy, long trial life
3 adopt CNC tightening system, high torque repetition precision, can monitor the torque Angle;
4 torque, Angle speed parameters can be set;
5. Tighten the data can be stored, downloaded, traced uploaded to the database;
6 two control modes: torque control corner control;
7. Support storage of multiple tightening processes procedures;
8. Support the storage of multiple sets of tightening point programs, strong generality compatibility with a variety of products with small size differences, support the teaching purchasing points;
9. Alarm prompt function of screw sliding teeth;
10. Equipped with screw float lock detection function;
11 IO interface supports multiple groups of product anti-freeze; MES system can be connected to monitor production data;
Ii. Structural characteristics
1. Single output shaft structure, man-machine interaction;
2. Optional servo motor screw structure;
3 support marble + linear motor structure;
4. According to the specific screw size precision, add torque sensor reducer (customized) corresponding;
5. PLC motion control card can be used
6. It can be equipped with protective cover, three-color lamp, anti-tardiness fixture, safety grating other auxiliary products;
Iii. Communication Description:
Support product code scanning
Support upper lower computer communication
3 supports multiple IO port signal intercrossing
Support tightening data PC interconnection application
Support tightening data upload MES system
Can be mounted :(insert multi-angle protection guide fixture picture safety raster picture + safety shield)
Three color lamp | shield | Stay fixture | Safety grating |
Product model | unit | TSA-44511 | TSA-665511 |
XYZ axis | X1X2, Y, Z1Z2, five axes | Six axis X1X2Y1Y2Z1Z2 | |
Torque range | kgf.cm | 1-8/5-25 | 1-8/5-25 |
Speed range | r.p.m | 0-2000 | 0-2000 |
Torque accuracy | kgf.cm | ±5% | ±5% |
Floating lock precision | mm | ±0.2 | ±0.2 |
Movement speed | mm | 1000 | 1000 |
Walk a precision | mm | ±0.05 | ±0.05 |
Working range | mm | 400/400/500/100 /100 | 600/600/500/500/100/100 |
Visual positioning | optional | optional | |
Torque calibration | System calibration | System calibration | |
Platform material | Plate/stone | Plate/stone | |
For the nail way | Vacuum adsorption blow type supply nail | ||
Structure that | Servo motor/linear motor + screw + CNC tightening unit | ||
Safety protection | Includes safety cover + safety grating | ||
Air pressure requirements | mpa | 0.4-0.6 | 0.4-0.6 |
The power supply voltage | V | 220±10% | 220±10% |
Overall dimensions | mm | 860/960/1600 | 860/960/1600 |
Specification parameters of CNC tightening shaft: (refer to picture album, file table)
model | Tie-in drive | Rated power (W) | Rated torque (M.n) | Instantaneous maximum torque (M.n) | Rated/Maximum speed (M.n) |
TS4603N | TA8480N0000 | 100 | 0.318 | 0.95 | 3000/5000 |
TS4607N | TA8480N0100 | 200 | 0.64 | 1.91 | 3000/5000 |
TS4609N | TA8480N0200 | 400 | 1.27 | 3.85 | 3000/5000 |
TS4614N | TA8480N0300 | 750 | 2.39 | 7.16 | 3000/5000 |
Platform dimension drawing
Tel:18025151318
Mai:service@jcuan.com
网址:www.jcuan.com
Company address: 3rd Floor, Building A, Kangpeng
Science park, No. 83, Yuanying Road, Zhuyuan Village,
Liaobu Town, Dongguan City
All rights reserved:Juchuan Assembly Automation Technology Co