Performance specification
1) The machine adopts belt transmission structure, supporting screws within the range of M1.4-M4;
2) The screw supply adopts adsorption supply mode, which is used in conjunction with the adsorption screw machine;
3) Machine brushless tool is used to tighten the shaft, with high precision maintenance free;
4) It has the function of sliding tooth alarm;
5) Float lock alarm prompt function;
6) Support the anti-freeze anti-error correspondence of the product on the fixture;
7) The system storage of multiple tightening processes procedures supports teaching purchasing points point position array;
The machine model
Product model | unit | TZA-331 | TZA-441 | TZA-5441 |
XYZ axis | _ | XYZ | XYZ | XY1Y2Z |
Motor form | _ | Stepper motor | ||
The transmission way | _ | Synchronizing wheel + synchronizing belt | ||
Working range | mm | 300/300/100 | 400/400/100 | 500/400/400/100 |
Walk a precision | mm | ±0.1 | ±0.1 | ±0.1 |
Maximum speed | mm/s | 2000 | 2000 | 2000 |
Control form | _ | PLC + touch screen | PLC + touch screen | PLC + touch screen |
Sliding tooth alarm | _ | There are | There are | There are |
Floating lock precision | mm | ±0.5 | ±0.5 | ±0.5 |
Air pressure requirements | mpa | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
The power supply voltage | V | 220V±10% | 220V±10% | 220V±10% |
Overall dimension (length * width * height) | mm | 810*660*1000 | 910*760*1000 | 1008*760*1000 |
Note: The code "H" should be added at the model end for interoperable models, the code "G" should be added at the model end for enhanced models.
Electric batch specification parameters can be carried
specifications | Torque range | Speed (no load) | Torque deviation (maximum torque) | weight | Dc voltage |
The controller | |
kgf.cm | N.m | rpm | kgf.cm | g | V | ||
MD-01AT | 0.2-1 | 0.02-0.1 | 1000 | ±5% | <350 | 30 | CS-100C |
MD-02AT | 0.3-2 | 0.03-0.2 | 1000 | ±5% | <350 | 30 | CS-100C |
MD-03AT | 0.4-3 | 0.04-0.3 | 1000 | ±5% | <350 | 30 | CS-100C |
MD-03FAT | 0.3-3 | 0.03-0.29 | 2000 | ±5% | <390 | 30 | CS-100C |
MD-06AT | 1-6 | 0.1-0.59 | 1000 | ±5% | <390 | 30 | CS-100C |
MD-06FAT | 1-6 | 0.1-0.59 | 2000 | ±5% | <390 | 30 | CS-100C |
MD-10AT | 2-10 | 0.2-0.98 | 1000 | ±5% | <390 | 30 | CS-100C |
MD-15AT | 3-15 | 0.29-1.47 | 1000 | ±5% | <390 | 30 | CS-100C |
MD-15FAT | 3-15 | 0.29-1.47 | 2000 | ±5% | <390 | 30 | CS-100C |
models | L | L1 | L2 | W | W1 |
TZA-331 | 808 | 540 | 580 | 660 | 478 |
TZA-441 | 908 | 640 | 680 | 760 | 478 |
models | L | L1 | W | W1 |
TZA-5441 | 1008 | 740 | 760 | 578 |
Tel:18025151318
Mai:service@jcuan.com
网址:www.jcuan.com
Company address: 3rd Floor, Building A, Kangpeng
Science park, No. 83, Yuanying Road, Zhuyuan Village,
Liaobu Town, Dongguan City
All rights reserved:Juchuan Assembly Automation Technology Co