Screw type tightening platform

I want to make an inquiry

Performance specification

1) The machine adopts screw rigid transmission structure, supporting screws within the range of M1.2-M5;

2) Adopt adsorption supply mode use with adsorption screw machine;

3) Machine brushless tool is used to tighten the shaft, with high precision maintenance free;

4) It has the function of sliding tooth alarm;

5) Float lock alarm prompt function;

6) Support the anti-freeze anti-error correspondence of the product on the fixture;

7) The system storage of multiple tightening processes procedures supports teaching purchasing points point position array;

8) The system can be equipped with external protective cover safety grating;

The machine model

Product model	unit	TMA-331	TMA-441	TMA-5441
XYZ axis	_	XYZ	XYZ	XY1Y2Z
Motor form	_	Closed-loop stepper motor
The transmission way	_	Precision screw
Working range	mm	300/300/100	400/400/100	500/400/400/100
Walk a precision	mm	±0.05	±0.05	±0.05
Maximum speed	mm/s	600	600	600
Control form	_	PLC + touch screen	PLC + touch screen	PLC + touch screen
Sliding tooth tip	_	There are	There are	There are
Floating lock precision	mm	±0.5	±0.5	±0.5
Air pressure requirements	mpa	0.4-0.6	0.4-0.6	0.4-0.6
The power supply voltage	V	220V±10%	220V±10%	220V±10%
Overall dimension (length * width * height)	mm	8086601000	9087601000	10087601000

Note: The code "H" should be added at the model end for interoperable models, the code "G" should be added at the model end for enhanced models.

Electric batch specification parameters can be carried

specifications	Torque range		speed (No load)	The torque deviation (Maximum moment)	weight	Dc voltage	The controller
specifications	kgf.cm	N.m	rpm	kgf.cm	g	V	The controller
MD-01AT	0.2-1	0.02-0.1	1000	±5%	<350	30	CS-100C
MD-02AT	0.3-2	0.03-0.2	1000	±5%	<350	30	CS-100C
MD-03AT	0.4-3	0.04-0.3	1000	±5%	<350	30	CS-100C
MD-03FAT	0.3-3	0.03-0.29	2000	±5%	<390	30	CS-100C
MD-06AT	1-6	0.1-0.59	1000	±5%	<390	30	CS-100C
MD-06FAT	1-6	0.1-0.59	2000	±5%	<390	30	CS-100C
MD-10AT	2-10	0.2-0.98	1000	±5%	<390	30	CS-100C
MD-15AT	3-15	0.29-1.47	1000	±5%	<390	30	CS-100C
MD-15FAT	3-15	0.29-1.47	2000	±5%	<390	30	CS-100C
MD-18AT	4-18	0.39-1.77	1200	±5%	<630	30	CS-100C
MD-18FAT	4-18	0.39-1.77	2000	±5%	<630	30	CS-100C
MD-25AT	7-25	0.69-2.45	850	±5%	<630	30	CS-100C
MD-25FAT	7-25	0.69-2.45	2000	±5%	<630	30	CS-100C